Modular Case Conveyors

Alvey Enquiries

Scott now has a range of modular conveyors available for 'light loads’, enabling fast start-up and minimising downtime on operating sites. To increase agility in line with industry 4.0, we designed this new range of components around two key themes: Robustness & Flexibility.

  • Robustness: the range of uses mechanical components, which can be reused and refitted as your business develops.
  • Flexibility: components work together, collaborating in a multi-agent system.

The electrical architecture and decentralised control within the range has been designed for fast reconfiguration, supporting your growth immediately and at a lower cost. The range also allows for the integration of external components and connections on existing production lines. Each component also has its own group of accessories for dynamic accumulation control.

The range integrates our EvoLink control architecture, which is based on four key components:

  • A modular cabinet; a single EvoBox reference that is ramped up according to installation size and building configuration. The purpose of the cabinets is to ensure human safety and analyse power consumption in real time.
  • A modular wiring system, with quick connectors for fast installation start-up, and component interoperability based on mesh network typology.
  • A local controller, this ensures each component's 'internal logistics' functions. It is compliant with Ethernet standards and provides services for interfacing with the WMS/WCS. Rules for specific routing can be configured in a controller to relieve traffic with the supervisor.
  • EvoWare software for dynamic, real-time supervision of your line, with advanced maintenance functions.

The entire EvoLink solution is 100% electric, IP20 and IP54 compatible, and can convey loads of up to 50 kg with the following dimensions: bases 220 x 220 mm to 800 x 700 mm (min. height 25 mm). Most of our modules use 24 VDC for reduced power consumption and are very quiet. To reduce downtime the modules are designed so they can be replaced quickly.

Each component is pre-wired and tested in our factory.

Module Types

Straight Conveyor Module

  • Lengths: 3 m, 2 m, 1 m and ½ pitch
  • Widths: 510, 710, and 810
  • Accumulation by pitch (1–4) or train
  • Zero pressure
  • 1 m/s or 2 m/s (speed control)

Optional features: rejogging, fall-prevention guide, identification (by reading and/or setting down), brakes, vulcanisation.

Curved Conveyors Module

  • 2 radii of curvature
  • 30°, 45° , 90°, 180° (6 x 45)
  • Widths: 510, 710, and 810
  • Zero-pressure pitch accumulation
  • 1 m/s or 2 m/s (speed control)

Optional features: rejogging, fall-prevention guide.

'Diverter, injector and transfer' Module

  • at 45°, 90°
  • 1 m/s or 2 m/s, completely straight

Optional features: fall-prevention guide.

Straight bridge for passing through a fire door Module

  • 2 m
  • Motor or gravity driven
  • 1 m/s or 2 m/s
  • Door interface box

Weighing Module

  • Different resolutions
  • Widths: 510, 710 and 810
  • 1m/s or 2m/s

Elevation change

  • By a simple straight conveyor with brake and vulcanisation for slight slopes <10°
  • By integrating commercial solutions (continuous or discontinuous) into the standard EvoLink

Alvey Contact


Product Form for Modular Case Conveyors



Common Search Terms

Common Product Searches