Pallet Transfer Units

Transfer units are used for changing the transport direction of a pallet without changing the pallet orientation. Pallets cross from the roller conveyor section to the chain section (or vice versa) and are not turned. Available in several designs with either pneumatic or electric lifting of the conveyor section.

Enquire

The transfer unit is intended to be used in combination with a chain conveyor. A connecting chain conveyor is placed into two gaps in the lift part, allowing the transfer unit to be placed into any spot of the chain conveying system. The independence on the chain driven conveyor is also provides a significant increase in reliability.

The lifting device is driven by a 1.1kW electrical engine and the lifting is achieved by eccentric wheels. For reliable functioning, the chain conveyor height must be 25mm lower than the connecting roller conveyor.

 

Pallet Conveyors Hero

Technical Specification

Roller type:

Interroll, ∅ 88,9 x 2,9 - 5/8" - B15

Roller step:

103,2 mm

Transmission:

Roll-to-roll Chain loops S 5/8"

Conveying width (mm):

1.100 (1.300 optional)

Conveyor length (mm):  

930 mm

Externity rollers are non-driven

 

Minimum TOR (top of roll):

500 mm

Maximum TOR (top of roll):

700 mm

Frame:

Hot dip galvanized – 5 mm thick plate

Maximum load:

1.500 kg

Conveying speed:

13 m/min (full pallets)

Lifting mechanism:

4 eccentric wheels driven by an electric motor

Lifting position:

controlled by a proximity switch.

Lifting drive:

1,1 kW R57 motor with brake.

Standard lifting time:

1,3 s

Lifting stroke:

62 mm

Height difference between roller and chain required:

25 mm

×

Alvey Contact

×

Product Form for Pallet Transfer Units

×

×

Common Search Terms

Common Product Searches