Roller Pallet Conveyors

A modular conveyor system used for lengthwise transport of pallets. Designed for empty or full pallets with loads up to 1500kg. Available with a range of accessories to suit your system requirements.


Straight roller conveyors are a basic part of our modular conveyor systems. Produced in 4 standard lengths provides the ability to cover any distance required.

The design is heavy and robust which is perfectly suited for industrial environments with 5mm thick steel used for the frame with hot dip galvanizing as a standard surface treatment method. Close roller pitch allows for smooth pallet conveying as well as equal load distribution.

Pallet Conveyor Optional features

Standard pallet conveyors come with a standard set of optional features including devices for pallet stopping, centering and aligning. Reduced frame height enables roping for the wrapper - another option is to use a pallet lifting device. To allow safe crossing, step-over plates can be installed and for some installations, motors can be placed on top, instead of underneath the conveyor, which allows placing the frame directly on the ground.

  • Step-over plates (set of 7 plates)
  • Motor on top
  • Low frame version for integration under wrapping machine – ½” transmission
  • Inside-wrapper pallet lifting device
  • Empty pallet centering or aligning device
  • Full pallet (1.500 kg) centering
  • Full pallet alignment – 1 side
  • Full pallet stop – pneumatic
  • Fixed end stop

Roller Conveyor 3d


The controls are simplified in a way that each module is designed to convey one pallet at a time, aligning logic with the motorroller case conveyors. Short sections are ideal for buffer, while long sections are suitable for long range transport. Scott is able to provide full installation support including electrical equipment, cabling and programming.

Technical Specification

Roller type:

Interroll, ∅ 88,9 x 2,9 - 5/8" - B15

Roller step:

127 mm


Roll-to-roll Chain loops S 5/8"

Conveying width (mm):

1.100 (1.300 and 900 optional)

Conveyor length (mm):  


Minimum TOR (top of roll):

Motor on top: 150 mm
Motor underneath: 400 mm

Standard TOR:

400 to 700 mm by steps of 50 mm


Hot dip galvanized – 5 mm thick plate

Standard motor placement:


Maximum load:

1.500 kg


SEW gear motor – transmission to rollers with chain loop over 2 rollers and motor.

Motor underneath:

RF27 type – 0,37 kW

Motor on top:

SF47 type – 0,55 kW

Standard speed:

13 m /min (full pallets)
20 m /min (empty pallets)


Alvey Contact


Product Form for Roller Pallet Conveyors



Common Search Terms

Common Product Searches